RC Helicopter Reviews

Instruction Manual

This manual contains 20 pages.  Table of contents:

1. Electronics installation and wiring.
2. Tail servo and the heading gyro setup.
3. Servo & Linkage Installation
4. Pitch Setting
5. Head speed & Pitch Setting
6. Main rotor head assembling
7. Main Fram assembling
8. Driven Belt Installing
9. Driven Shaft Installing
10. ESC Instruction
11. Specifications of motor and ESC
12. Optional Replacement Part

Click here to download the manual!

About GAUI Hurricane 200 Series

The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. FEATURES: 90% Assembled Carbon Fiber Kit. CNC Head. CNC Tail. Plastic Blades. Decal Sheet. Painted Hi-Quality Fiberglass Canopy. Gaui Brushless Outrunner Motor (4800kv). Brushless ESC (12amp). Assembly Instructions.  Click here for more info about Gaui Hurricane!

About Gaui

TAI SHIH HOBBY CORPORATION ( TSHobby GAUI ) established in Taiwan in 1996, and dedicated itself fully into design, develop, and manufacturing of innovative R/C helicopters and airplanes. With years of research and development, TSH GAUI developed well plastic coated form technology applicable to wings, fins, and rotors, which offers the rigid and smooth surfaces while maintaining the trailing edge as thin as 0.15mm. Today, TSH GAUI carries diversified R/C aviation products, bringing the most pleasant leisure experience to R/C pilots worldwide for example Gaui 200 and Gaui 200SD.

Gaui Address:

No.118,Ren Ai Road,Pa-Li Hsiang,Taipei Hsien 249,Taiwan,R.O.C
Phone: +886-2-86305567  Fax: +886-2-26105567

Gaui are a Taiwanese manufacturer who produce a range of high-quality electric helicopters in almost ready to fly format.  Gaui Hurricane  is a 200 class of RC Heli.  There are many variants of this class.

1. Gaui Hurricane 200

Basic version with alloy head and partially alloy tail. The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame. The Gaui is the only sub Micro RC Helicopter that flys just like a 400 size machine.  More info click here!

2. Gaui Hurricane 200SD (Shaft Drive)

This is a sub-micro sized heli (smaller than a T-Rex 450) and ideal as a fully 3D indoor heli, or even for full 3D outdoors in light winds. It comes fully built with motor, ESC and blades, just install radio gear and go fly.  More info click here!

Manufacturer: Gaui

Class: 200 size electric

Build: ARF

Blade size: 195mm

Level: Beginner to Advanced

Frame

Material: Carbon fiber

Type: Stacked

Servo to swash linkage: Direct

Servo size: Sub micro

Rotor head

Grips: Metal

Head block: Metal

Links: Ball

Swash: Metal

Control: 120° CCPM

Tail

Drive system: Shaft drive

Auto driven: No

Tail pitch slider: Single

Tail blade grips: Metal

Tail case: Carbon fiber / Metal

Boom strut material: Carbon

Gearing

Main rotor to pinion ratio: 1:8

Main rotor to tail ratio: 1:3.5

Weight

Empty weight: 4.2 oz. (119.5g)

Fully loaded weight: 8.1 oz (220g)

Dimensions

Height: 6 in. (150mm)

Canopy width: 1 3/4 in. (44mm)

Landing gear: 3 1/4 in. (85mm)

Paddle to paddle diameter: 6 5/8 in. (170mm)

Main rotor diameter: 16 7/8 in. (428mm)

Tail rotor diameter: 4 in. (105mm)

Length: 15 3/8 in. (386mm)

Gaui 200 Series  Replacement Parts

Gaui (GUEC GM-811)Brushless Motor(200W-kv4800) with 15T Gear & Connector
Gaui (GUEC GM-811)Brushless Motor(200W-kv4800) with connector & 10-15T Gear(for H200SD)
Gaui Micro Receiver(SRX-6UH-40MHZ)
Gaui Micro Receiver(SRX-6UH-72MHZ)
Gaui BMS-306BB Servo
Gaui Li-Po Battery (7.4v 800mah)
H200SD Tail Output Shaft Set
H200 FRP Painted Body & Canopy Set(A Type)
H200 Upper Frame Set

Click here to get this replacement parts!