1. Electronics installation and wiring.
2. Tail servo and the heading gyro setup.
3. Servo & Linkage Installation
4. Pitch Setting
5. Head speed & Pitch Setting
6. Main rotor head assembling
7. Main Fram assembling
8. Driven Belt Installing
9. Driven Shaft Installing
10. ESC Instruction
11. Specifications of motor and ESC
12. Optional Replacement Part
The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. FEATURES: 90% Assembled Carbon Fiber Kit. CNC Head. CNC Tail. Plastic Blades. Decal Sheet. Painted Hi-Quality Fiberglass Canopy. Gaui Brushless Outrunner Motor (4800kv). Brushless ESC (12amp). Assembly Instructions. Click here for more info about Gaui Hurricane!
About Gaui
TAI SHIH HOBBY CORPORATION ( TSHobby GAUI ) established in Taiwan in 1996, and dedicated itself fully into design, develop, and manufacturing of innovative R/C helicopters and airplanes. With years of research and development, TSH GAUI developed well plastic coated form technology applicable to wings, fins, and rotors, which offers the rigid and smooth surfaces while maintaining the trailing edge as thin as 0.15mm. Today, TSH GAUI carries diversified R/C aviation products, bringing the most pleasant leisure experience to R/C pilots worldwide for example Gaui 200 and Gaui 200SD.
Gaui Address:
No.118,Ren Ai Road,Pa-Li Hsiang,Taipei Hsien 249,Taiwan,R.O.C
Phone: +886-2-86305567 Fax: +886-2-26105567
Newly arrived today is the GAUI EP200 SD, which is the ‘bling?version of the normal EP 200. This is a sub-micro sized heli (smaller than a T-Rex 450) and ideal as a fully 3D indoor heli, or even for full 3D outdoors in light winds. It comes fully built with motor, ESC and blades, just install radio gear and go fly.
Features:
* The tiniest 3D capable helicopter equipped with all CNC precision metal parts.
* Equipped with the fiber glass painted canopy.
* Light-weight 3D canopy ( 9g ) for option.
* Kit comes with BL motor and ESC.
* Only a short time needed for completion. (95% factory assembled)
* The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms.
* Shaft driven tail rotor system with one-way main gear Gaui 200SD.
* 1mm thick CF mainframe and fin set.
* The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
* CNC titanium anodized aluminum and CF composite result in a light weight and rigid tail gear case.
* CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control.
* Fully equipped ball bearings.(34 micro bearings)
* Seesaw head with bell-hiller system.
* CCPM collective pitch mechanism (variable pitch).
* Extensive upgrade parts and option parts available.
Specification:
* Overall length: 415mm (including cabin & canopy)
* Main rotor diameter: 428mm
* Tail rotor diameter: 100mm
* Motor: KV4800 brushless motor (included)
* ESC : 12A ESC (included)
* Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.)
* Main rotor blades: SP Blades(included) or Wooden(option)
* Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery
The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame.
Features:
- The tiniest 3D capable helicopter equipped with all CNC precision metal parts.
- Equipped with the fiber glass painted canopy.
- Light-weight 3D canopy ( 9g ) for option.
- Kit comes with BL motor and ESC.
- Only a short time needed for completion. (95% factory assembled)
- The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms.
- Available with Belt driven tail rotor system with one-way main gear or SD Shaft Drive.
- 1mm thick Carbon fiber mainframe and fin set.
- The swash plate and the rotor head system of GAUI 200 equipped with all Precision CNC titanium anodized aluminum.
- CNC titanium anodized aluminum and Carbon Fiber composite result in a light weight and rigid tail gear case.
- CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control.
- Fully equipped ball bearings.(33 micro bearings)
- Seesaw head with bell-hiller system.
- CCPM collective pitch mechanism (variable pitch).
- Extensive upgrade parts and option parts available.
Specifications:
- Overall length: 415mm (including cabin and canopy)
- Main rotor diameter: 428mm
- Tail rotor diameter: 100mm
- Motor: KV4800 brushless motor (included)
- ESC : 12A ESC (included)
- Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.)
- Main rotor blades: SP Blades(included) or Wooden(option)
- Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery
The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame. The Gaui is the only sub Micro RC Helicopter that flys just like a 400 size machine. The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics.
The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame. The Gaui is the only sub Micro RC Helicopter that flys just like a 400 size machine. The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. Details here!
Good Points:
90% Assembled Carbon Fiber Kit.
CNC Head.
CNC Tail.
Plastic Blades.
Decal Sheet.
Painted Hi-Quality Fiberglass Canopy.
Gaui Brushless Outrunner Motor (4800kv).
Brushless ESC (12amp).
Features:
The tiniest 3D capable helicopter equipped with all CNC precision metal parts.
Equipped with the fiber glass painted canopy.
Light-weight 3D canopy ( 9g ) for option.
Kit comes with BL motor and ESC.
Only a short time needed for completion. (95% factory assembled)
The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms.
Available with Belt driven tail rotor system with one-way main gear or SD Shaft Drive.
1mm thick Carbon fiber mainframe and fin set.
The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
CNC titanium anodized aluminum and Carbon Fiber composite result in a light weight and rigid tail gear case.
