2nd September 2008, 11:32 pm

The GAUI 200 is high performance sub-micro Heli with all-CNC components and Carbon Fiber frame. The Gaui is the only sub Micro RC Helicopter that flys just like a 400 size machine. The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. Details here!
Good Points:
- 90% Assembled Carbon Fiber Kit.
- CNC Head.
- CNC Tail.
- Plastic Blades.
- Decal Sheet.
- Painted Hi-Quality Fiberglass Canopy.
- Gaui Brushless Outrunner Motor (4800kv).
- Brushless ESC (12amp).
Features:
- The tiniest 3D capable helicopter equipped with all CNC precision metal parts.
- Equipped with the fiber glass painted canopy.
- Light-weight 3D canopy ( 9g ) for option.
- Kit comes with BL motor and ESC.
- Only a short time needed for completion. (95% factory assembled)
- The best servo position for CCPM swash plate. All linkages which link to the swash plate are all vertical to the servo arms.
- Available with Belt driven tail rotor system with one-way main gear or SD Shaft Drive.
- 1mm thick Carbon fiber mainframe and fin set.
- The swash plate and the rotor head system equipped with all Precision CNC titanium anodized aluminum.
- CNC titanium anodized aluminum and Carbon Fiber composite result in a light weight and rigid tail gear case.
- CNC tail rotor grips and 2-bearing tail pitch slider produces precision tail control.
- Fully equipped ball bearings.(33 micro bearings)
- Seesaw head with bell-hiller system.
- CCPM collective pitch mechanism (variable pitch).
- Extensive upgrade parts and option parts available.
- For more features click here!
Specifications:
- Overall length: 415mm (including cabin and canopy)
- Main rotor diameter: 428mm
- Tail rotor diameter: 100mm
- Motor: KV4800 brushless motor (included)
- ESC : 12A ESC (included)
- Flying weight: 230g ~ 250g (It may vary according to size of a battery pack and R/C gears.)
- Main rotor blades: SP Blades(included) or Wooden(option)
- Flying duration: 7~8 minutes with 7.4v/800mah Li-Po battery
- Click here for details!
Check this out!
2nd September 2008, 11:14 pm
The CH-47 Chinook is a versatile, twin-engine, tandem rotor heavy-lift radio controlled rc helicopter. More info here!
Specification
- All-up Weight: 768g (Battery included)
- Main Rotor Dia. B: 450mm
- Main Rotor Dia. A: 450mm
- Overall Length: 575mm
- Battery: 7.4V 2200mAh Li-Po
- Receiver: RX-2409
- Drive System: 4 X 370SH
- Transmitter: WK-2401
- Servo: WK-7.6-3 weight 8.5g;speed 0.11sec/60o(4.8V); torque 0.9kg.cm(4.8V); dimension 22.5X11.5X24mm
Features
- Highly emulational shape with the-state-of-the-art workmanship.
- New 2.4G technology, with the functions of automatic identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time.
- It utilizes the 2.4G 3-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment.
- High performance 4 * 370SH motor powered by 7.4V 2200mAh Lipo offers 10 minute flight time, depending on the flight modes.
- For more detail features click here!
Check this out!
2nd September 2008, 10:50 pm

It’s The World’s #1 4-Channel Falcon 40 Radio Remote Control RC Helicopter RTF Fixed Pitch.
“This Falcon 40 RC helicopter is the coolest toy I’ve ever owned! Even my 12 year old boy can fly it. This is about my 7th or 8th RC helicopter since 1980…. Finally, a helicopter that works and is not a mechanical nightmare!”
Fly these super little helicopters indoors or outside when its calm. It is ready to fly and complete with radio control unit, batteries and chargers and PC Simulation Cable. A brilliant way to get acclimatized to RC helicopter control. For more details click here!
Specs
Exceed RC Radio Remote Control Helicopter – Falcon 40 – Fixed Pitch
90 degree Swashplate
Suitable for Indoor and Outdoor
370 Carbon brush main motor
4-ch and LED with Multistage Function
3-in-1 receiver
Bulit-in Gyro
Lightweight and Solid Structure
Product Details
Main Rotor Span : 510mm
Tail Rotor Span : 145mm
Fuselage length : 469mm
Product Dimensions (mm) : 460L.x150W.x160H.
Item Size (mm) : 550 L.x230 W. x140 H.
Weight : without battery 185g
Frequency : 35 / 72 mhz
For more details click here!

Item Features
Full Function Radio Controlled
4 Channel R/C Set included, complete Left/ Right, Up/ Down Control ( RUDDER, AILERON, ELEVATOR AND THROTTLE
Factory Pre- assembled, zero assembly time
Carbon Fibre flybar and boom for Superior strength and durability
Suitable for Indoor / Outdoor / Backyard / Park ( 500 sqft area )
10¡V15 minutes Flight time for each charge
Brand New, with original package
Full spare Parts available
Brand New, with original Package
Complete kit
Item Packing
3 in 1 Mixer / Gyro / Receiver Board
4 Channel Receiver
2 X 9g Servos
1 Pair of Crystals
Transmitter 4 Channel with Servo ( Mode 1 & Mode 2 )
8.4v Ni-MH 650 mAh Rechargeable battery
AC Adaptor charger
Instruction Manual
Check this out!
12th February 2008, 12:10 am
It is the most cheapest and reliable 6-Channel CCPM 3D Ready-to-Fly Electric RC Helicopter. It called Exceed Eagle 50
A very solid model for beginners recommended by professional hobbyists with Tons of Quality Low-Price Replacement Parts & Upgrades.
It is only $109!! Click here for more details!
Specifications:
Main Rotor Diameter:
550 MM 22 inch
Tail Rotor Diameter:
150 MM 6 inch
Overall Length:
580 MM 23 inch
Overall Height:
180 MM 7 inch
All-up Weight:
540g (battery included) 19 ounce
Battery:
11.1V 800mAh /10C rechargeable Lipo battery
Power:
370 carbon brush motor
Servo:
3 x 7.6g
Pitch Control:
Rubber, alieron, elevator and throttle, CCPM mode, 3D conversion and alterable pitch system
Radio System:
6 Channel FM 72Mhz, include a pair of interchangeable crystal
Charger:
Quick 110V wall charger
Computer Simulation:
Serial simulation cable (software not included)
Check this out!
9th February 2008, 12:41 am

Specifications
- Main Rotor Diameter: 680mm (27 inch )
- Tail Rotor Diameter: 130mm (5 inch)
- Length: 650mm (26 inch)
- Height: 230mm (9 inch)
- Flying Weight: 670g (24 oz)
- Drive System: Esky 450 3800KV brushless motor
- Rotate Ratio: 12:140/10:22
- Servo: 4x 8g servos
- Gyro: Esky Professional Gyro
- Speed Controller: 25A brushless ESC
- Battery: 11.1V 1800mah 20C 3-Cell Li-Polymer
- Control system: 6CH CCPM Multifunctional FM Transmitter and Receiver
- Radio Control Range: 2500 feet (762m)
- Click here for more features!
This Esky 6 helicopter is incredible value for money and will suit everyone from the cautious and eager to progress beginner all the way up to the more experienced pilot. (Some previous flying experience is recomended as this helicopter is not a toy).
Price: $189.95 USD
Check latest price! Get Discount Price!