RC Helicopter Reviews

No description for this product could be found, but have a look over at Amazon for reviews and other information.

Full function 3 channel radio control (Left /Right, Forward/Backward, Hover, and Lands)
Real life helicopter styling
3 channel digital proportional control
Flies over 50m high
2 powerful N50 motor
Newly designed super strong crashworthy propeller
Altitude and rotor speed control
Flight stabilizing system
Super lightweight airframe
Brake for easy landing
Up to 30m (100 ft) radius control range

Ready To Fly, Easy To Fly
Complete Kit, Ready to Fly (Everything is included and 100% assembled — only required 6 AA batteries for the radio transmitter to start flying)

Specification:
Length: 460mm (18.11″)
Height: 180mm (7.08″)
Battery: 7.4V 800mAh Lithium-Polymer
Flight Time: 6-8 minutes

(more…)

The Latest Product of Colco LYNX-380XL 6 Channel 3D CCPM RTF Helicopter.  The Lynx-380XL Helicopter is designed as easy to use, full featured Helicopter R/C model capable of all forms of rotary flight. It features the best design available on the Micro-Heli market to date, providing flying stability for beginners, full aerobic capability for advanced fliers, and unsurpassed reliability for customer support.  CCPM (collective cyclic pitch mixing) transmitter is especially designed for flying the CP 3D helicopter. The throttle stick controls both the motor speed and the pitch servos.

FEATURES:

This is a high quality CCPM 3D heli that can be mastered by the beginner in normal flight mode and enjoyed by the advanced pilot in 3D mode.

*Comes with a powerful 7.4V 1600mAH Li-po battery and charger , much longer flying time than the usual Ni-MH pack.
*Fully functional CCPM heli with 3D and inverted flight capabilities, capable of flying acrobatic.
*3 x 6g servos and high quality lock gyro
*6 Channel radio gear with 3D and gyro lock switches
*New design of rotor head, so that it is more stable in the air, suitable to fly in indoor as well as outdoor.
*Carbon fibre tail boom
*All ball bearing construction

This is Colco’s latest offering and has a true CCPM rotor head for all those extreme 3D and inverted aerobatics you’ve always dreamed of doing! The new Lynx 3D is packed with features including metal swash plate and links as standard making for a very robust and accurate flyer. On lesser machines you need to replace the standard plastic parts with third party metal components.

Other features are full steel ball bearing construction, extra set of symmetrical blades, Li-Pol battery, high quality lock gyro, top quality radio gear, metal chassis and carbon fiber tail boom. The transmitter is a quality unit with 3D switch and trimmer, gyro lock switch and trimmer, reverse on all channels, buddy socket, and a DC in socket for charging NiCads.

As with all Colco products the Colco Lynx is constructed using only high quality materials, the highest production standards and ball bearings throughout to produce one of the best quality helicopters in it’s class. It comes 100% ready built and is setup and test flown by the factory ensuring you a trouble free first flight. To further enhance your enjoyment, you can fly this both indoors and out.

With FREE simulator software and connector cable, this means you can train to fly your Lynx on the pc using the transmitter as the controller just as you would with the real model. This is very useful for practising those inverted flight maneuvers!

SPECIFICATIONS :

Rotor Head : Full CCPM with Metal swash plate
Transmitter : 6 Channel 3D
Receiver : 6 Channel
Weight : 320g
Main Rotor Diameter : 520mm
Fuselage Length : 530mm
Fuselage Width : 120mm
Fuselage Height : 180mm
Tail Rotor Diameter : 130mm
Weight : 320g

Click here to buy this helicopter now!

This colco thunderbird manual contains 58 pages. Table of contents:

• Introduction
• Safety Instructions
• Know your Radio Transmitter
• Heli Trim and Pre-Flight Setup
• Adjust the Balance with the
• Battery
• Gyro Setting
• Service and Cleaning
• Repair Hints & Tips
• Explosion Drawing
• Individual Spares/Part List
• PP Joy

Click here to download this manual!

About Colco Thunderbird

Equipped with precision electronic gyroscope to stabilized flying posture and provide emulational flying effect. High-speed strong magnetic motor is used to get powerful lift. Free control of 360 degree, easy and simple manipulation. Compatible with FEDA Heli Parts

More info click here!

Instruction Manual

This manual contains 20 pages.  Table of contents:

1. Electronics installation and wiring.
2. Tail servo and the heading gyro setup.
3. Servo & Linkage Installation
4. Pitch Setting
5. Head speed & Pitch Setting
6. Main rotor head assembling
7. Main Fram assembling
8. Driven Belt Installing
9. Driven Shaft Installing
10. ESC Instruction
11. Specifications of motor and ESC
12. Optional Replacement Part

Click here to download the manual!

About GAUI Hurricane 200 Series

The Heli is made with superb craftsmanship and it was designed for 3D flight including invert flight and full aerobatics. FEATURES: 90% Assembled Carbon Fiber Kit. CNC Head. CNC Tail. Plastic Blades. Decal Sheet. Painted Hi-Quality Fiberglass Canopy. Gaui Brushless Outrunner Motor (4800kv). Brushless ESC (12amp). Assembly Instructions.  Click here for more info about Gaui Hurricane!

About Gaui

TAI SHIH HOBBY CORPORATION ( TSHobby GAUI ) established in Taiwan in 1996, and dedicated itself fully into design, develop, and manufacturing of innovative R/C helicopters and airplanes. With years of research and development, TSH GAUI developed well plastic coated form technology applicable to wings, fins, and rotors, which offers the rigid and smooth surfaces while maintaining the trailing edge as thin as 0.15mm. Today, TSH GAUI carries diversified R/C aviation products, bringing the most pleasant leisure experience to R/C pilots worldwide for example Gaui 200 and Gaui 200SD.

Gaui Address:

No.118,Ren Ai Road,Pa-Li Hsiang,Taipei Hsien 249,Taiwan,R.O.C
Phone: +886-2-86305567  Fax: +886-2-26105567